Available exclusively to the UK the custom colour F501SP is a UK built version of the award-winning F501 loudspeaker. Building on the outstanding sonic performance and aesthetics of the original model, the F501SP benefits extensively from technology developed for the premium F700 Series and can now be specified in a bespoke RAL Classic colour finish, allowing each pair to be tailored to its environment. The IsoFlare point source driver uses a 150mm (6”) multi-fibre bass and midrange cone with FyneFlute surround, coupled with a 25mm magnesium dome compression tweeter. An upgraded crossover seamlessly integrates the drivers within the F501 cabinet, while the SP model adds Fyne’s signature aluminium sandwich plinth to enhance stability and further refine the BassTrax downward firing porting system. The connection panel is also upgraded and features a fifth terminal to ground the driver chassis, reducing the influence of RF interference in the circuit. Celebrating this UK Special Production with enhanced cosmetics, the F501SP includes diamond machine cut detailing on the aluminium driver chassis and an anodised machined aluminium plinth. Customers can work with selected dealers to specify a personalised finish from the RAL Classic colour range, creating a loudspeaker that is both sonically exceptional and visually individual. Available exclusively to the UK. System Type 2 ½ way, downwards firing port, with BassTraxTM Tractrix diffuser*, twin cavity loading system Recommended amplifier power (Watt RMS) 30 – 180 Continuous power handling (Watt RMS) 80 Sensitivity (2.83 Volt @ 1m) 91dB Nominal impedance 8 Ohm Frequency response (-6dB typical in room) 36Hz – 34kHz Drive unit complement 1 x 150mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm magnesium dome compression tweeter, neodymium magnet system. 1 x 150mm multi-fibre bass cone, FyneFlute surround. Crossover frequency 250Hz & 1.7kHz Crossover type Bi-wired passive low loss, 2nd order low pass, 1st order high pass. Cryo-Lite treated. Dimensions – HxWxD 984 x 288 x 320mm (38.7 x 11.3 x 12.7”) Net Weight – Each 21.0kg (46.3lb) Finishes RAL Classic Colour System S-Trax Position (from cabinet front edge) 44mm (1.7″) SuperTrax Position (from cabinet front edge) 20mm (0.8″)
