VM95 series 78rpm SP cartridge on AT-HS6 Headshell AT-VM95SP/H VM95 series 78rpm SP cartridge on AT-HS6 Headshell – AT-VM95SP mounted on AT-HS6BK headshell, The total set weight is 15.5g and Assembled and tested in the Audio-Technica Factory in Fukui-Japan Features VM95 series 78rpm SP cartridge on AT-HS6 Headshell AT-VM95SP mounted on AT-HS6BK headshell The total set weight is 15.5g Assembled and tested in the Audio-Technica Factory in Fukui-Japan VM95 Series – Styli compatibility Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible. AT-VMN95C AT-VMN95E AT-VMN95EN AT-VMN95ML AT-VMN95SH AT-VMN95SP Conical Bonded (3mil) Stylus A conical bonded stylus with a large curvature radius at the tip. The curvature radius is 3 mil, and suitable for playing 78 RPM records from a wide variety of eras. Preassembled With AT-HS6BK Headshell The AT-VM95SP cartridge is fitted onto the 9g aluminiumdie cast body headshell Specs Frequency Response 20 – 20,000 Hz Vertical Tracking Angle 23° Vertical Tracking Force 1.8 to 2.2g (2.0g standard) Stylus Construction Bonded Round Shank Recommended Load Impedance 47,000 Ω
