Using proprietary stainless steel and ceramic bearings the Stillpoint ultra SS V2 essentially takes the micro vibrations coming from the component that is sitting on it and dissipates them (top-down). It also decouples the component from the surface that the Stillpoints is sitting on. Most other component feet work in the 20hz to approximately 1kHz band. The Stillpoints work with vibrations downwards of 100 nanoseconds. These are the frequencies that harm the audio signal the most. They act as a filter on these frequencies, and the benefit is passed into the audible band. FEATURES The Stillpoints Ultra SS V2’s are designed to work under most electronic components, Ultra bases can be added at any time for even greater performance and adjustability. Also when used in conjunction with the relevant adaptors, they will absolutely transform your speakers. Taking the place of the factory fitted spikes. Options Available in sets of 3 or 4 and with or without Ultra Base. (There is a saving if purchased together) Available in Silver or Black finishes Please Note If you intend to use Stillpoints Ultra SS V2 under your loudspeakers you will require threaded adapters to connect them to your loudspeakers. Please contact us and let us know which loudspeakers you have and we can advise on which adapters are required. Prices of the adapters are available upon request and they are around £10-16 each unless an unusual thread is required. The adaptors are in silver finish. PLEASE NOTE: the Hard Hat should be loosened upon installation and the isolated component levelled. When attaching to loudspeakers, DO NOT affix the surface of the Stillpoint Ultra SS tightly to the surface of the speaker. Leave an air space the thickness of a business card or more between the two surfaces.
