Surround speakers BRS1 The BOREA BRS1 are effects speakers specially designed to reproduce surround sound tracks in a home cinema setup. Be totally immersed in your films and TV series thanks to an enveloping sound that reproduces details and sound effects at 360°. The selector on the rear of each speaker makes it easy to choose the desired configuration: bipole mode for uniform 5.1 surround sound and dipole mode for optimum spatialization in advanced configurations. Its shallow depth and simplified wall mounting make it easy to integrate. The speaker is supplied with a damping system to decouple the speaker from the wall and ensure easy cable routing. With the BRS1, you’ll be able to experience the thrills of a cinema, right in the heart of the action. Surround effects speakers 360° sound diffusion Enhance your home cinema experience with this pair of BRS1 effects speakers, designed to spread ambient sound and special effects throughout your room easily. They create 360° immersion by delivering stunning, highly accurate sound effects that appear to come from every angle. You’ll be right in the middle of the action, with the most immersive, realistic sound experience. BOREA drivers Consistent sound The BRS1 incorporates the acoustic elements that have made BOREA such a success, guaranteeing perfect consistency of sound with the other speakers in the range. Its 2 EFS 25mm / 1 inch silk dome tweeters, positioned on either side of the speaker, deliver precise, detailed sound throughout the room. The 16cm / 6.5 inches diameter midwoofer driver, made from natural cellulose pulp, delivers rich, faithful sound for total immersion in your favourite films, TV series and concerts. DOUBLE CONFIGURATION The switch on the back of each speaker makes it easy to choose the sound diffusion mode you want to use: Bipole : for 5.1 installations, the tweeters are in phase, meaning they play the same sound simultaneously. This gives very good sound distribution with just 2 speakers. Dipole : For installations with 7 or more speakers, the tweeters are out of phase, which means that the sound is distributed from speaker to speaker following a very precise sound logic; there is interaction between each effect speaker, which reinforces the spatialisation of the sound. Simple, discreet installation Designed to be wall-mounted, these speakers are distinguished by their shallow depth, allowing them to be discreetly integrated into any interior. To make them easy to install, they are fitted with a double cross-hook system, and a template is included in the box to simplify the process. The speaker is also supplied with a damping system to decouple the speaker from the wall, ensuring optimum sound reproduction and easy cable routing. Speaker Specifications • Type : Surround Speakers • Crossover : 2 Ways • Sensitivity (dB/W/m) : 89 dB • Bandwith (+/-3dB Hz) : 55Hz-22 000Hz • Nominal impedance : 8Ω • Minimum impedance : 4,6Ω * The impedance of a speaker can be simplified as an electrical resistance. The lower is the impedance of the speaker, the more current the amplifier will have to deliver. – Nominal impedance is measured at a frequency of 1kHz – Minimum impedance is measured at low frequencies. TRIANGLE loudspeakers never fall below 3 Ohms, which means they can be used with almost all Hi-Fi and Home Cinema amplifiers. Type : Surround Speakers Crossover : 2 Ways Sensitivity (dB/W/m) : 89 dB Bandwidth (+/-3dB Hz) : 55Hz-22 000Hz Nominal impedance : 8Ω Minimum impedance : 4,6Ω Power Handling : 90W The impedance of a speaker can be simplified as an electrical resistance. The lower is the impedance of the speaker, the more current the amplifier will have to deliver. – Nominal impedance is measured at a frequency of 1kHz – Minimum impedance is measured at low frequencies. TRIANGLE loudspeakers never fall below 3 Ohms, which means they can be used with almost all Hi-Fi and Home Cinema amplifiers. Driver information’s 3 Drivers : • 2 x 25mm / 1 inch silk dome tweeter • 1 x 16 cm / 6.5 inches midwoofer with natural cellulose pulp membrane Weight & Dimensions Speaker dimensions • Width : 380 mm • Height : 275 mm • Depth : 150 mm Box dimension (pair) (W x H x D): 455 x 355 x 435 mm Weight • Net weight : 5,8 kg • Gross weight : 11,64 kg Speaker dimensions • Width : 380 mm • Height : 275 mm • Depth : 150 mm Box dimension (pair) (W x H x D): 455 x 355 x 435 mm Weight • Net weight : 5,8 kg • Gross weight : 11,64 kg Accessories • 2 x Magnetic fabric protection grille • Adhesive rubber pads • Drilling template for wall installation
